Automatic Milk Powder Can Seaming Machine Vacuum Chamber China Manufacturer

This vacuum chamber is new type of vacuum can seaming machine designed our company. It will coordinate two sets of normal can sealing machine. The can bottom will be pre-sealed first, then fed into the chamber for vacuum suction and nitrogen flushing, after that the can will be sealed by the second can sealing machine to complete the full vacuum packaging process.

Performance characteristics

Compared with combined vacuum can seamer, the quipment have obvious advantage as below,

• High speed : the speed of combined vacuum can seamer is 6-7cans/min, our machine is above 30cans/min.;

• Steady operation: no can jam;

• Low cost: about 20% of combined vacuum can seamer on base of same capacity;

• Low consumption of vacuum and nitrogen;

• Low milk powder overfalling, within 1g for 10,000 cans, more clean;

• More easy operation and maintenance;

Technical Parameters

• Production speed: above 30cans/min.

• RO: ≤2%

• Flying powder: within 1g/10000cans

• Including one pc of CO2 mixing flowmeter and 0.6 M3 of CS air storage tank

• Power: 2.8kw

• Air consumption: 0.6M3/min, 0.5-0.6Mpa

• N2 consumption: 16M3/h, 0.1-0.3Mpa

• CO2consumption: 16M3/h, 0.1-0.3Mpa