Our chilling unit (A unit/ contherm) is similar to Votator type of equipment and share many small component. Mechanical seal and scraper blades are typical interchangeable parts. The heat transfer cylinder consists of two pipe in pipe design with inner pipe for product and outer pipe for cooling refrigerant. Each cylinder is jacketed, insulated and cladded with stainless steel for use with direct evaporative refrigerant. Each cylinder features an external surge drum with liquid level control valve, sight glass, safety valve, evaporation pressure regulating valve, electronic pressure transmitter and pressure gauge
All other product contact parts are made from stainless steel. Blades are standard with long lasting PEEK or inexpensive POM and seal parts, 'o' rings etc. will be compatible with product. The support frame will be stainless steel SS304 square tube and no mild steel parts.
Material: wetted part IS 316L, the rest is SUS304；blades：PEEK, blades are installed fixedly, easy to be removed, components inside the material cylinder have no dead corner & are easy to be cleaned, to prevent products contamination caused by residual materials.
Our SSHE is based on USA technology, in reference with European equipment, manufacture according to the situation locally. The features is same as equipment in US and Europe, but the figuration is a little bit different.
The medium cylinder is a flooded refrigerant evaporator, which is equipped with oil return hole.
|额定生产能力 （人造黄油）||Nominal Capacity(Puff pastry margarine)||kg/h||1000||2000|
|额定生产能力 （起酥油）||Nominal Capacity(Shortening)||kg/h||1200||2300|
|主轴直径||Dia. Of Main Shaft||mm||126||126|
|结晶筒冷却面积||Heat Transmission Surface||m2||0.7||0.7+0.7|
|冷却管内径/长度||Inner Dia./Length of Cooling Tube||mm||140/1525||140/1525|
|刮板排数||Rows of Scraper||pc||2||2|
|刮板主轴转速||Rotating Speed of Main Shaft||rpm||660||660|
|最大工作压力（产品侧）||Max.Working Pressure (material side)||bar||60||60|
|最大工作压力（冷媒侧）||Max.Working Pressure (medium side)||bar||16||16|
|最低蒸发温度||Min. Evaporating Temp.||℃||-25||-25|
|产品管道接口尺寸||Processing Pipe Size||DN32||DN32|
|制冷剂供液管直径||Dia. of Refrigerant Supply Pipe||mm||19||22|
|制冷剂回气管直径||Dia. of Refrigerant Return Pipe||mm||38||54|
|热水箱容积||Hot Water Tank Volume||L||30||30|
|热水箱功率||Power of Hot Water Tank||kw||3||3|
|热水循环泵功率||Power of Hot Water Circulation Pump||kw||0.75||0.75|
Completely sealed, fully insulated, corrosion-free stainless steel casing guarantees years of trouble-free operation.
*Narrower Annular Space
The narrower 7mm annular space is specially designed for the crystallization of grease to ensure more efficient cooling.*Higher Shaft Rotation Speed
Shaft rotation speed up to 660rpm brings better quenching and shearing effect.
*Improved Heat Transmission
Special, corrugated chilling tubes improve the heat transmission value.
*Easy Cleaning and Maintenance
In terms of cleaning, Hebeitech aims to make the CIP cycle fast and efficient. In terms of maintenance, two workers can quickly and safely dismantle the shaft without lifting equipment.
*Higher Transmission Efficiency
Synchronous belt transmission to obtain higher transmission efficiency.
The 762mm long scrapers makes chilling tube durable
Product seal adopts silicon carbide wear-resistant ring balanced design, rubber O ring use food grade silicone
The product contact parts are made of high-quality stainless steel, and the crystal tube is made of carbon steel, and the surface is plated with a hard layer
The modular design of the product makes
the maintenance cost lower.
Commissioning Picture At Customers' Factory