WELCOME TO OUR WEBSITE ! 
      ABOUT US   |   CONTACT US
You are here: Home » Products » SHORTENING PROCESSING LINE » Scraper Heat Exchanger Palm Oil Shortening Vegetable Ghee Margarine Processing Line Making Machine China Supplier
Share to:

Scraper Heat Exchanger Palm Oil Shortening Vegetable Ghee Margarine Processing Line Making Machine China Supplier

 Our chilling unit (A unit) is similar to Votator type of equipment and share many small component. Mechanical seal and scraper blades are typical interchangeable parts. The heat transfer cylinder consists of two pipe in pipe design with inner pipe for product and outer pipe for cooling refrigerant. Each cylinder is jacketed, insulated and cladded with stainless steel for use with direct evaporative refrigerant. Each cylinder features an external surge drum with liquid level control valve, sight glass, safety valve, evaporation pressure regulating valve, electronic pressure transmitter and pressure gauge.

Quantity:
  • SP

Technical Specification

Our chilling unit (A unit) is similar to Votator type of equipment and share many small component.  Mechanical seal and scraper blades are typical interchangeable parts.  The heat transfer cylinder consists of two pipe in pipe design with inner pipe for product and outer pipe for cooling refrigerant.  Each cylinder is jacketed, insulated and cladded with stainless steel for use with direct evaporative refrigerant.  Each cylinder features an external surge drum with liquid level control valve, sight glass, safety valve, evaporation pressure regulating valve, electronic pressure transmitter and pressure gauge

Each rotating shaft is concentrically mounted within the cylinder and has 4 rows of floating type scraper blades in a maximum configuration.  The shafts are directly driven by individual 22 kW geared motors. The TEFC motors drives will be suitably guarded.  Each drive is normally connected with a current sensing device mounted in the control panel. The current sensing device will automatically switch off the cooling in case the drive approaches current overload. This feature also protects against freeze-up.

The shafts are fitted with a rotary union to allow for the internal circulation of warm water and provision to flush mechanical seals is also included. An integral electric heater with circulation pump to service the shaft heating is included.

All other product contact parts are made from stainless steel.  Blades are standard with long lasting PEEK or inexpensive POM and seal parts, 'o' rings etc. will be compatible with product.  The support frame will be stainless steel SS304 square tube and no mild steel parts.    

Material: wetted part IS 316L, the rest is SUS304bladesPEEK, blades are installed fixedly, easy to be removed, components inside the material cylinder have no dead corner & are easy to be cleaned, to prevent products contamination caused by residual materials.

2 set of 22KW & 2 set of 30KW Jiangsu Guomao type GR motor & speed reducer, rotary speed: approx. 320RPM.

Our SSHE is based on USA technology, in reference with European equipment, manufacture according to the situation locally. The features is same as equipment in US and Europe, but the figuration is a little bit different.

The medium cylinder is a flooded refrigerant evaporator, which is equipped with oil return hole.


Flowchart

0

Commissioning Picture At Customers' Factory

1       2


3       4


5       6


After-sale Service


8


RANDOM PRODUCTS

COOPERATIVE CLIENT
We Devote To Promote Advanced Technology, Quality Equipment & Perfect Service For Investors, And Assist To Make Investment More Simple!

CONTACT US

 (+86)-311-66693082
 (+86)-139-0311-9967
 marketing@hebeitech.com​
 No. 86, Xisanzhuang Street, Shijiazhuang, China