Toilet Soap Duplex Paper Packaging Machine
This machine is can be widely used in many industries. It is specific for automatic single, double or triple paper wrapping of rectangular, round and oval shaped like toilet soaps, chocolate, food etc. Soaps from stamper enter the machine through the in-feed conveyor and transferred into the pocketed belt by the 5 rotary clampers turret, then paper cutting, soap pushing, wrapping, heat sealing and discharging.
The whole machine is controlled by PLC, highly automatic and adopts touch screen for easy operation and setting. Centralized oil lubrication with pump. It can be connected not only by all kinds of stampers upstream, but also downstream packaging machines for whole line automation.
This machines is upgraded model based on Italian soap wrapping machine type, not only meeting all the performance of soap wrapping machine, but also combining the most advanced packaging machine area transmission and control technologies with better performance.
Try to be flat on top, bottom and sideEgg shape is not applicable because not easy to seal
产品尺寸Size： LxWxH = (70-140) x (35-65) x (25-37)mm
For other special size, please inform in advance
Inner paper: white cardboard
Outside paper: composite heat-melt packing paper
Inner roller paper diameter: 76mm, max out diameter smaller than 350mm
Product comes into the input conveyor from up-stream machines continuously
Special-designed 4-phase soap sucking mechanism will place the soaps to conveying chain one by one
When the products come into the packer, the out and inner paper will be cut at same time and be pushed in to rotary
After rotating for 180 degree, the product will be pushed into the conveyor, during the process, packing paper will be folded and heat sealed
After sealing, products will be conveyed out by output coneyor
注意产品出来时，是底部朝上方的。Please note that when products come out, bottom side faces up.
Human safety: equipment like door safety switch, protection shied, E-stop and isolation switch will keep operator from danger
Machine safety: equipped with frequency speed changing and overload protection. Meanwhile, main driver has torsion limitation protection function, the spring will restrict the torsion through clutch between cartridge and cartridge set to protect the machine
操作简单Easy to operate
Central controlled by PLC, and can be connect and communicate with up-stream and down-stream machines to make whole line automatic
Equipped with touching screen and HMI, easy to adjust the parameter, all error info can be displayed
Equipped with visible adjusting mechanism like dividing rule and reader and a skilled worker can finish adjusting for about 15 minutes.
Equipped with jog control, the machine can run by traction, easy to electrically control the machine and observe the running condition
4-phase soap sucking mechanism is driven by an independent motor, which runs the gear divider. The sucking mechanism can be synchronous with main machine through special frequency
No paper will be sent if the sensor does not sense the soap
Double-chain soap pushing mechanism makes sure that the products will be fully fixed and no excursion. The packing quality can be guaranteed.
2+2 film placing holder makes changing material very easy
Film feeding is controlled accurately by servo motor and color sensor, so the film feeding is more stable and the color mark tracking is more accurate, hence ensuring good wrapping effect. The cutting blades for stiffener and the outer paper are both controlled by servo system too, so the cutting position can be very accurate. It’s more convenient now since no need change parts between different specifications.
The main driving Servo motor reducer is equipped with synchronous belt driving with high accuracy. The driving chain use spiral bevel gear and equips with lubrication box to improve the lubrication and extend the service life
Main parts of the machine are produced by CNC machining center to guarantee the good quality and interchangeability.
The carbon steel shield is handled with plastic-spraying, beautiful and clean. Transparent PC protection plate is appliedto obverse the running condition
严格检测 Strict test
Static test, 24 hours continuous unload running and loading running tests will be proceeded
Safety, completeness, stability, operability and packing quality will be tested
3) 产品出厂前，都会进行客户现场验收测试或将测试结果和录像发给客户进行确认 ；
Before delivery, FAT will be carried out or videos and test result will be sent to clients for confirmation.
Commissioning Picture at Our Customers' Factory