Chinese wholesale Packed Bed Absorption Column - Margarine Pilot Plant Model SPX-LAB (Lab scale) – Shipu Machinery

Short Description:

Product Detail

Product Tags

Feedback (2)

We believe in: Innovation is our soul and spirit. High-quality is our life. Consumer need to have is our God for Albumen Powder Filling Machine, biscuit packing machine, salt packing machine, Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly!

Chinese wholesale Packed Bed Absorption Column - Margarine Pilot Plant Model SPX-LAB (Lab scale) – Shipu Machinery Detail:

Working Principle

The product is pumped into the lower end of the heat exchanger cylinder. As the product flows through the cylinder, it is continuously agitated and removed from the cylinder wall by the scraping blades. The scraping action results in a surface free from fouling deposits and a uniform, high heat transfer rate.
The media flows in counter current direction in the annular space between the heat transfer cylinder and the insulated jacket. A spiral coil provides a higher heat transfer efficiency for steam and liquid media.
Rotor driving is achieved by an electric motor installed on the upper shaft end. Rotor speed and product flow can be varied to suit the application.
SPX series scraped-surface heat exchangers can be connected in series for in line heating and cooling.

Standard Design

SPX series Scraped-surface heat exchanger utilities a modular design for vertical mounting on a wall or column and includes:
● Compact structure design
● Solid shaft connection (60mm) structure
● Durable blade material and technology
● High precision machining technology
● Solid heat transfer tube material and inner hole processing
● The heat transfer tube can be disassembled and replaced separately
● Gear motor drive – no couplings, belts or sheaves
● Concentric or eccentric shaft mounting
● GMP, 3A and ASME design standard; FDA optional
Working temperature : -30°C~ 200°C

Maximum working pressure
Material side : 3MPa (430psig), optional 6MPa (870psig)
Media side : 1.6 MPa (230psig),optional 4MPa (580 psig)

Technical spec.

型号	换热面积	间隙	长度	刮板	尺寸	功率	耐压	转速
Model	Heat Exchanger Surface Area	Annular Space	Tube Length	Scraper Qty	Dimension	Power	Max. Pressure	Main Shaft Speed
Unit	M2	mm	mm	pc	mm	kw	Mpa	rpm

SPX18-220	1.24	10-40	2200	16	33505601325	15 or 18.5	3 or 6	0-358
SPX18-200	1.13	10-40	2000	16	31505601325	11 or 15	3 or 6	0-358
SPX18-180	1	10-40	1800	16	29505601325	7.5 or 11	3 or 6	0-340

SPX15-220	1.1	11-26	2200	16	33505601325	15 or 18.5	3 or 6	0-358
SPX15-200	1	11-26	2000	16	31505601325	11 or 15	3 or 6	0-358
SPX15-180	0.84	11-26	1800	16	29505601325	7.5 or 11	3 or 6	0-340
SPX18-160	0.7	11-26	1600	12	27505601325	5.5 or 7.5	3 or 6	0-340
SPX15-140	0.5	11-26	1400	10	25505601325	5.5 or 7.5	3 or 6	0-340
SPX15-120	0.4	11-26	1200	8	23505601325	5.5 or 7.5	3 or 6	0-340
SPX15-100	0.3	11-26	1000	8	21505601325	5.5	3 or 6	0-340
SPX15-80	0.2	11-26	800	4	19505601325	4	3 or 6	0-340

SPX-Lab	0.08	7-10	400	2	1280200300	3	3 or 6	0-1000
SPT-Max	4.5	50	1500	48	150012002450	15	2	0-200

注意：超高压机型可选最高耐压 8MPa，电机功率最大为 22kW.
Note: High Pressure model can provide pressure environment up to 8MPa（1160PSI）with a motor power of 22KW（30HP）

Cylinder

The inner cylinder diameter are 152 mm and 180mm

SSHE-SPX01 SSHE-SPX02 SSHE-SPX03
SSHE-SPX04 SSHE-SPX05

Material

The heating surface is normally made of stainless steel, (SUS 316L), honed to a very high finish on the inner surface. For special applications different types of chrome coatings are available for the heating surface. The scraping blades are available in stainless steel and different types of plastic materials including a metal detectable type. The blade material and configuration is selected based on the application. Gaskets and O-rings are made of Viton, nitrile or Teflon. Suitable material will be selected for each application. Single seals, flushed (aseptic) seals are available, with material selection depending on the application
Optional equipment
● Drive motors of different types and different power configurations, also in explosion – proof design
● The standard heat transfer tube material is carbon steel chrome-plated,316L stainless steel , 2205 duplex stainless steel , pure nickel are optional
● Optional Shaft diameters(mm)：160, 150, 140, 130, 120, 110, 100
● Optional the products flow from the center of the shaft
● Optional high torque SUS630 stainless steel transmission spline shaft
● Optional High Pressure mechanical seal up to 8MPa (1160psi)
● Optional Water tempered shaft
● The standard type is horizontal installation, and vertical installation is optional
● Optional Eccentric shaft