Reliable Supplier Chilli Powder Packing Machine - Automatic Vacuum Seaming Machine with Nitrogen Flushing – Shipu Machinery

Technical Specification

● Sealing diameterφ40~φ127mm，sealing height 60~200mm；
● Two working modes are available: vacuum nitrogen sealing and vacuum sealing；
● In the vacuum and nitrogen filling mode, the residual oxygen content can reach less than 3% after sealing, and the maximum speed can reach 6 cans / minute (the speed is related to the size of the tank and the standard value of the residual oxygen value)
● Under vacuum sealing mode, it can reach 40kpa ~ 90Kpa negative pressure value, speed 6 to 10 cans / min；
● The overall appearance material is mainly made of stainless steel 304, with a thickness of 1.5mm；
● Plexiglass material adopts imported acrylic, thickness 10mm, high-end atmosphere；
● Use 4 rollers cans for rotary sealing, the sealing performance index is excellent；
● Use PLC intelligent program design plus touch screen control, easy to use and set up；
● There is lack lid alarm prompting function to ensure efficient and uninterrupted work of the equipment；
● No cover, no sealing and failure detection shutdown, effectively reducing equipment failure；
● The drop lid part could add 200 pieces at a time (one tube)；
● Change can diameter need to change mould, the replacement time is about 40 minutes；
● Change can diameter need to change mould：chuck+clamp can part+drop lid part，different material can and lid need to change roller；
● change can height，it do not need to change mould，adopt hand-screw design, effectively reduce the fault, the adjustment time is about 5 minutes；
● Strict testing methods are used to test the sealing effect before delivery and delivery to ensure product quality；
● The defect rate is extremely low, iron cans are less than 1 in 10,000, plastic cans are less than 1 in 1,000, paper cans are less than 2 in 1,000；
● The chuck is quenched with chromium 12 molybdenum vanadium, the hardness is more than 50 degrees, and the service life is more than 1 million cans；
● The rolls is imported from Taiwan. The hob material is SKD Japanese special mold steel, with a life span of more than 5 million seals；
● Configure the conveyor belt with a length of 3 meters, a height of 0.9 meters, and a chain width of 185mm；
● Size: L1.93m*W0.85m*H1.9m，packaging size L2.15m×H0.95m×W2.14m；
● Main motor power 1.5KW / 220V, vacuum pump power 1.5KW / 220V, conveyor belt motor 0.12KW / 220V total power: 3.12KW;
● The net weight of the equipment is about 550KG, and the gross weight is about 600KG；
● Conveyor belt material is nylon POM；
● The air compressor needs to be configured separately. The power of the air compressor is above 3KW and the air supply pressure is above 0.6Mpa；
● 25.If you need to evacuate and fill the tank with nitrogen, you need to connect with an external nitrogen gas source, the gas source pressure is above 0.3Mpa；
● The equipment is already equipped with a vacuum pump, no need to purchase separately.