Structure Introduction of Automatic auger filling machine

news1
●Mainframe hood — Protective filling center assembly and stirring assembly to isolate external dust.
●Level sensor — The height of the material can be adjusted by adjusting the sensitivity of the level indicator according to the material characteristics and packaging requirements.
●Feed port — Connect the external feeding equipment and change the position with the vent.
●Air vent — Install the ventilation pipe, isolate the external dust into the material box, and make the internal and external pressure of the material box consistent.。
●Lifting column — The height of the outlet of the filling screw can be adjusted by turning the lifting hand wheel. (the clamp screw must be loosened before adjustment)
●Hopper — The effective volume of the charging box of this machine is 50L (can be customized).
●Touch screen — Human machine interface, please read Chapter 3 for detailed parameters.
●Emergency stop — Switch of the whole machine control power supply
●Auger screw — The package is customized according to the packaging requirements.
●Power switch — Main power switch of the whole machine. Note: after the switch is turned off, the terminals in the equipment are still powered.
●Conveyor — The conveyor is a transport for can.
●Servo motor — This motor is a servo motor。
●Arclic cover — Protect the conveyor to prevent foreign objects from falling into the can
●Main cabinet — For power distribution cabinet, open from the back. Please read the next sectionfor the description of the power distribution cabinet.


Post time: Jan-04-2023
Write your message here and send it to us